Our Products


T3610 packs ultrahigh-speed frame rates and performance into a compact platform, 50% lighter than the closest equivalents. Back side illuminated (BSI) sensor technology maximizes sensitivity for sub-microsecond exposure times as often required in high-velocity testing.

  • 38,040 fps at 1280 x 800
  • Exposure Index:
    • Mono 40,000 – 200,000 D
    • Color 12,500 – 64,000 D
  • Up to 256GB RAM
  • FAST option*, 190ns min. exposure

Get a quote for this Product

At its full 1 Mpx resolution of 1280 x 800 the Phantom T3610 captures over 38,000 fps. This  38 Gpx/second throughput is maintained through its full range for a top frame rate of 875,000 fps at both 1280 x 32 (standard mode) and 640 x 64 (binned mode). Binned mode increases the vertical resolution of the camera’s top frame rates by combining the sensor pixels 2×2. Binned mode is included on both mono and color T3610 cameras, however the output will switch to mono when used on a color camera.

The frame rates provided by the T3610 are sought after for combustion, impact testing, spray dynamics, and shock wave analysis. Any extremely fast application that can benefit from fast exposures to reduce motion blur and image sensors that offer high light sensitivity will also be an excellent match. The T3610 custom BSI sensor delivers on all fronts, providing native ISO of 40,000D mono and the ability to shoot in environments with limited supplemental light.

The T3610 includes premium features to enable a variety of applications including:

  • EDR (Extreme Dynamic Range) provides flash mitigation for ballistic studies by dynamically adjusting exposure in saturated areas of the image.
  • Programmable I/O to interface with DAQ systems and a variety of measurement sensors, which can be recorded and viewed as metadata in Cine files.
  • Remote, standalone operation is achieved by using the on-camera controls, video monitor and CineMag.

*Cinemag V Compatibility is not active at launch, firmware updates are needed.

Key Features

  • Binning Mode – frame rate boost at 640 x 384 and below
  • CineMag V Compatibility*
  • SDI and HDMI video outputs
  • Programmable I/O – Assign and define camera signals
  • 10Gb Ethernet Option

What’s in the box?

  • 280W Power supply with XLR extender
  • Ethernet Cable
  • Mini-SDI video cable
  • Printed manual
  • Phantom PCC software

The custom 4 Mpx sensor operates with 13 Gpx/second image throughput. The premium imaging specifications are ideal for motion analysis applications that require data precision such as high-speed digital imaging correlation (DIC), particle image velocimetry (PIV), and stress and strain analysis.

Advanced Phantom features enable a variety of applications by allowing for customized camera settings.  Features such as:

  • Quiet mode to eliminate vibration for microscopy and 3D measurement techniques
  • Remote, standalone operation using the On-camera controls, video monitor and CineMag enables outdoor applications
  • CineMag supports direct recording for long duration events

Different situations can often require different types of lenses.  The Phantom T1340 has interchangeable lens mounts (Nikon, PL, C, M42 and Canon EF with Electronic control) which enables the use of high quality and specialized optics without limitation. The camera mount can be customized for the particular test as needed.

Key Features

  • Binning Mode – frame rate boost at 1024 x 976 and below
  • CineMag V Compatibility
  • SDI and HDMI video outputs
  • Programmable I/O – assign and define camera signals
  • 10Gb Ethernet Option

What’s in the box?

  • Power supply with XLR extender
  • Ethernet Cable
  • Mini-SDI video cable
  • Printed manual
  • Phantom PCC software
Resolution FPS
1280 x 800 12,600
1280 x 720 14,000
1024 x 512 23,400
640 x 480 34,700
512 x 384 49,600
256 x 256 103,600
256 x 128 193,900
128 x 64* 415,500
128 x 32* 653,000
128 x 16* 820,500
Short Description
  • The Phantom T3610 camera captures up to 38,040 fps at full 1-Mpx resolution and has all of the features of the T-Series family.
  • Binned mode combines pixels for higher frame rates at 640 x 384 and below.
Sensor Specifications
  • CMOS Back Side Illuminated (BSI) Sensor
  • 1280 x 800 pixels
  • 18.5 µm pixel size, 37 µm with binning enabled
  • 23.7 mm x 14.8 mm; 27.94mm diagonal
  • 12-bit depth
  • CAR in 256 x 32 increments,
  • 128 x 64 in Binned modes
  • Standard Mode:
    • ISO Monochrome 40,000D; 125,000T
    • E.I. range 40,000-200,000D;
    • ISO Color 12,500D, 16,000T
    • E.I. range 12,500-64,000D;
  • Binned Mode:
    • ISO Monochrome 50,000D, 160,000T
    • E.I. range 50,000-250,000D;
    • ISO Color 12,500D, 12,500T
    • E.I.range 12,500-64,000D

*Binned Mode is Mono Output Only

  • 64GB, 128GB, 256GB high-speed internal RAM.
  • Up to 63 memory partitions.
  • CineMag V for non-volatile storage (not available at launch)
Special Features
  • 10Gb Ethernet (optional)
  • Binned mode for double the vertical resolution at high frame rates (Output is monochrome)
  • Multi-cine mode and up to 63 memory segments
  • Continuous recording
  • Event marking
  • Frame timestamp
  • IRIG In (modulated and unmodulated)
  • IRIG Out (unmodulated)
  • Sync-to-Trigger
  • Shutter off mode for PIV exposure
  • 230 ns straddle time in PIV mode
  • Burst mode
  • Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
  • DHCP or Secondary IP address
  • Field-based firmware upgrade capable
Timing and Synchronization
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG in/out
  • Ready output (high when camera is armed and ready to record)
  • Strobe output (low during frame exposure time)
  • Gb Ethernet (standard) for both control and data
  • 10Gb Ethernet (optional)
  • WiFi via USB Dongle for control (option to order from factory to permanently disable WiFi)
Video Out
  • 2X 3G HD-SDI ports
  • Micro-HDMI
  • Supports up to 1080p60.
Motion Analysis
  • Basic measurements via Phantom Application:
    • Distance
    • Speed
    • Acceleration
    • Angles and Angular Speed
    • Manual and Automatic point collection for target tracking
    • Compatible with 3rd party solutions
  • 100 – 240 VAC, 280 Watt power supply included
  • 20 – 28 VDC secondary power input on back panel


  • 38 Gpx/second
  • Standard Mode Max Speeds:
    • 1280 x 800 38,040 fps (full resolution)
    • 1280 x 32 772,000 fps (875,000 fps with FAST option)
  • Binned Mode Max Speeds:
    • 640 x 384 156,710 fps (full binned resolution)
    • 640 x 64 772,000 fps (875,000 fps with FAST option)
  • 1 µs minimum exposure standard, 190 ns minimum exposure with FAST option (export controlled)
  • Global electronic shutter
  • Extreme Dynamic Range (EDR)
  • Auto Exposure
  • Exposure Index (E.I.) for controlling apparent ISO
  • Shutter Off mode for PIV
Record Times
  • 4.5 seconds at maximum frame rate, 12 bits, 1200 x 800 resolution into 256GB internal memory
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger standard
  • Trigger from software
  • Hardware trigger BNC
  • High Voltage (HV) trigger compatible
  • Dedicated Trigger, Timecode In ports
  • Dedicated Remote port for RS232
  • Dedicated Range Data
  • 3 Programmable I/O ports includes adjustable (assign and define) signals including:
    • F-sync
    • strobe
    • event
    • trigger output
    • ready and more
Camera Control
  • Phantom Camera Control (PCC)
  • On-Camera Controls (OCC)
  • SDK available


  • Nikon F-mount standard, supports F & G style lenses
  • Canon EOS mount optional
  • PL-mount optional
  • C-mount optional
  • M42-mount optional
  • (lens not included)


Video Processing


  • Brightness
  • Gain
  • Gamma
  • Saturation
  • White Balance
  • Pedestal
  • Tone curve
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale



Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Supported File Formats


  • Cine RAW & Cine Compressed
  • AVI, h.264 mp4
  • Apple ProRes .mov
  • Multipage TIFF
  • Uncompressed QuickTime
  • Windows BMP
  • OS/2 BMP, PCX, TGA



Mechanical Specifications
  • 5 x 5 x 8.25 inches, 12.7 x 12.7 x 21 cm (H, W, L) without handle or lens.
  • Handle adds 2″(5 cm) to height
  • Weight: 9.4 lbs, 4.3 kg
Environmental Specifications
  • Operating Temperature: -10 to +50 C
  • Storage Temperature: -20 to + 70 C
  • Regulatory(EMI/EMC/ESD):
    • Emissions:  EN 61326-1, FCC part 15
    • Immunity: EN 61326-1
  • Shock:
    • Operational: 30G, 11mSec sawtooth, 3 axes, 60 pulses total.
  • Vibration:
    • Operational:7.5 Grms, 50Hz-2KHz, 3axes, IAW MIL-STD-202H.
  • Safety: IEC 60950-1
  • Phantom SDK, C#, C++
  • LabView
  • MatLab
Ships Standard With
  • Power supply 280W w/ XLR cable
  • Fischer Ethernet cable
  • BNC Cable
  • Phantom PCC software
  • Getting Started Guide
  • CineMag interface
  • FAST Option
  • 10Gb Ethernet Option
Popular Accessories
  • Case with custom foam
  • CineMag V
  • CineStation IV
  • Video monitor
Canon EF Mount for Flex4K cameras

Canon EF Mount

Canon EF Lens mount with electronic focus and aperture controls for EOS lenses. Control the lens from PCC.  Includes shims for backfocus and case.





Phantom CineMagV

Phantom CineMag V

Phantom CineMag V compatible with Flex4K, UHS, TMX, and T-Series camera models.  Available up to 8 TB

Phantom CineStation IV

Phantom CineStation IV

Download station for CineMag IV and CineMag V recording media.  Includes Gb and 10Gb Ethernet network support standard.




Pickle Switch, 6' (2m) Cable


Pickle Switch, 6′ (2m) Cable

Pickle Switch. Connect to the Trigger port on camera or Capture cable,
breakout box or Mini-BOB for manually triggering a camera with the press of a button.