Our Products

Miro C210

The Phantom Miro C210 is a standalone version of our Miro C210J camera. The small, light, and rugged body, combined with a sensor of small pixels, makes this high detail camera perfect for microscopy work.

  • 1,800 fps at 1280 x 1024
  • Exposure Index Range:
    • Mono 2,500 – 12,500
    • Color 640 – 3,200
  • Memory Capabilities
    • 8, 16, GB RAM
    • 128GB internal, non-removable CineFlash
  • 1.3 Mpx, 5.6 micron pixel size

Get a quote for this Product

The Phantom Miro C210 houses the 128GB internal CineFlash memory inside a small, rugged body and is capable of up to 67,000 fps at smaller resolutions.  This is perfect for many applications and experiments as it allows up to 13 individual 8GB shots, or 63 separate partitions to be saved before downloading is necessary.  These features help to keep laboratory workflow smooth and efficient.

The Miro C210 also has an internal, non-removable battery that is configurable for a variety of situations and can run for up to 10 minutes.  This gives some untethered flexibility in the case of accidental power cable severance. 

The 1.3 Mpx sensor with 12-bit depth and tightly packed 5.6 micron pixels produces highly detailed images.  When combined with the advanced features shots are delivered quickly with clear detail.

Key Features:

  • 1.3 Mpx sensor
  • Internal Battery
  • Up to 16GB RAM for 4.2 seconds record time
  • Up to 63 partitions possible
  • Advanced features:
    • Image-Based Auto Trigger
    • SYNC-to-Trigger
    • Quiet Fans

What’s in the box?

  • Power Supply with XLR extender
  • Ethernet cable
  • DIN 1.0/2.3 cable for SDI
  • MiniBOB
  • Printed Manual
  • Phantom PCC software
Resolution FPS
1280 x 1024 1,800
1280 x 720 2,540
768 x 768 2,385
768 x 576 3,150
640 x 480 3,760
512 x 512 3,530
512 x 384 4,650
384 x 288 6,100
256 x 256 6,810
128 x 64 22,380
64 x 8 67,140
Short Description
  • Small, light, and versatile, the Miro C210 is the “go-to”camera for a variety of applications. It achieves 1,800 fps at full 1.3 Megapixel resolution of 1280 x 1024, comes with a 128GB internal CineFlash for nonvolatile memory, and is available with either 8GB or 16 GB of RAM.
Sensor Specifications
  • CMOS sensor
  • 1280 x 1024 pixels
  • 5.6 µm pixel size
  • 9.18 mm diagonal
  • 12-bit depth
  • ISO Monochrome 2,500D; 5,000T
  • Color 640D; 640T adjustable
Memory
  • 8GB or 16GB internal RAM, 128GB internal, non-removable CineFlash
Special Features
  • Segment memory for up to 63 cines in multi-cine mode
  • Image-Based Auto-Trigger
  • Continuous recording
  • Memory gate
  • Event marking
  • Frame timestamp
  • IRIG In (modulated or unmodulated)
  • IRIG Out (unmodulated)
  • Secondary IP address
  • Field-based firmware upgrade capable
Timing and Synchronization
  • 20ns timing accuracy
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG In (modulated or unmodulated)
  • IRIG Out (unmodulated)
Connectivity
  • Gb Ethernet for control and data. C210: Ethernet is accessed through an Ethernet cable with a Fischer connector.
Video Out
  • HD-SDI available through DIN 1.0 / 2.3 connector on front of the cameras
Motion Analysis
  • Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions
Power
  • 16 – 32 VDC, 12 W, 18W during battery charge.
  • 65 Watt 100 – 240 VAC power supply included.
  • Rechargeable battery for back-up.
Throughput/Speed
  • 2.3 Gpx/s Maximum speed at full resolution of 1280 x 1024 is 1,800 fps. Maximum speed at reduced resolution of 64 x 8 is 67,140 fps. Minimum frame rate at all resolutions is 100 fps.
Exposure
  • 5 µs minimum exposure
  • Auto Exposure
Record Times
  • 4.2 seconds at maximum frame rate, 12-bit depth, largest resolution and into maximum internal memory (16GB)
Triggering
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger standard
  • Trigger from software
  • Hardware trigger BNC on MiniBob and Miro Junction Box
Signaling
  • Capture connector (Trigger, IRIG In, IRIG Out, Aux1, Aux2)
  • Aux1 signal can be assigned to FSYNC, Event, Strobe or Memgate.
  • Aux2 signal can be assigned to Ready or Strobe.
Camera Control
  • Phantom Camera Control software (PCC)
  • Multi-Cam software
  • Remote Control Unit (RCU): Both C210J and C210 have “remote” connectors to connect to an RCU
  • SDK available
Lensing
  • The C210 and C210J have 1″ C-lens mounts that can be reversed to accept CS lenses.
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorithm
  • Flare
  • Pedestal
  • Tone curve
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Supported File Formats
  • Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
Mechanical Specifications
  • 2.9 x 2.9 x 3.25 inches, 73 x 73 x 82.5 mm (H x W x D)
  • without lens or lens mount. Weight: 1.2 lbs, 0.54 kg (without lens)
Environmental Specifications
  • Operating Temperature: 0°C – 50°C
  • Storage Temperature: -20°C to +70°C
  • Shock:170G IAW MIL-STD 202G (without lenses)
  • Vibration: 24 Grms, IAW MIL-STD 202G (without lenses)
APIs
  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With
  • Power supply
  • Ethernet cable
  • Miro MiniBoB
  • DIN 1.0/2.3 cable
  • PCC software
Popular Accessories
  • Remote Control Unit
  • DIN 1.0 / 2.3 cable
  • Miro Junction Box
Miro C210
Miro C210
Miro C210
Miro C210

Pickle Switch, 6′ (2m) Cable

Pickle Switch. Connect to the Trigger port on camera or Capture cable, breakout box or Mini-BOB for manually triggering a camera with the press of a button.

Miro C 1.0/2.3 DIN cable

1.0/2.3 DIN to BNC cables, with female connectors for HD/SDI in Miro C210, C210J, Miro C320, and C320J

Miro J-Box Adapter cable

Adapter cable to connect VEO, Miro LC/R/M, Miro C210 and C320 to System cable for use with Miro J-Box 2.0

The Miro Junction Box 2 (VRI-Miro-JB-2) accepts up to 6 Miro cameras at once. The Miro C210J and C320J uses a System Cable, while all other Miro cameras require a Miro C Capture or system adapter cable.

The Phantom RCU is a legacy solution for Flex, Miro and v-Series models. The Bluetooth dongle that was designed for the RCU also works with the handheld PCU from AbelCine, which is also compatible with most modern Phantom cameras. The Bluetooth dongle is needed for wireless connectivity with the RCU or PCU and connects to Phantom cameras with a “Remote port” (v-Series, UHS and Flex cameras). Note that Miro and VEO camera models do not have a ‘Remote’ port directly on the camera body. However, VEO cameras can be connected using the CAMEO VEObob accessory.
There are two third-party solutions that Vision Research recommends highly because they work for ALL Phantom cameras over their Ethernet connection:

    • The Semote handheld remote controller includes a handheld unit and camera unit to transmit the signal. This device provides a connection up to approximately 30 meters.

 

  • The iPhantom app works on any Apple IOS device, and connects to any Phantom camera that has a WiFi router attached to the camera. This is particularly great for VEO S-model cameras (with firmware after version 106), because those cameras include a USB port for a USB WiFi dongle available from Vision Research.

 

Brand

Phantom

Menu